Alarm Lock Tech

Popular Alarm Lock webinars scheduled for Oct 26-27 and Nov 3

Back by popular demand, Alarm Lock webinars covering DL Windows and an Overview of Networx Trilogy/ArchiTech locks.

On October 26 and 27 there are multiple sessions on DL Windows. These sessions will cover the basics of the Alarm Lock Trilogy programming software. Topics such as how to create accounts and locks, adding users and creating schedules are just a few. There will be 2 sessions each day.

On November 3, an Overview of the Networx/ArchiTech locks will be covered. The topics will be the difference in the Networx systems vs. the T3 Trilogy locks as well as how the system is programmed. There will be 3 sessions.

Register for a time and date that fit into your schedule here.

Popular Alarm Lock webinars scheduled Aug 10-12

Alarm Lock has scheduled webinars for August 10-12. These sessions will cover:

 

Tuesday August 10 - 2 sessions (11 am EDT and 3 pm EDT)

DL Windows v 5.5.3 software - This session will cover the Trilogy and Networx programming software from installation of the software to programming the Trilogy T3 locks. Included topics are: creating accounts and lock profiles, adding lock users and credentials, creating schedules and features of the Trilogy locks. Finally, programming the T3 locks with either a PCI2-U cable or DTM III module will be demonstrated.

 

Wednesday August 11 - 2 sessions (11 am EDT and 3 pm EDT)

Basic Networx Connectivity - This session will add to the DL Windows v 5.5.3 sessions picking up with adding the wireless programming Gateways and Expanders. Discovering the locks will be shown and then programming the locks will be demonstrated. Special capabilities such as Global Lockdown, wireless remote release and features specific to the Networx locks will be covered.

 

Thursday August 12 - 2 sessions (11 am EDT and 3 pm EDT)

AirAccess - This session will cover the NEW revolutionary AirAccess system. This system utilizes a cellular network versus the standard IT network and cloud based software that can be accessed from anywhere without the need to open IT ports or use static IP addresses. No IT department hassles. A demo of the real time reporting software will be shown.

 

Register for these popular Alarm Lock webinars early to reserve a spot as the seats will go fast. Click here to find a time that fits into your schedule.

December Alarm Lock webinars available now

Alarm Lock has added 8 webinars for the month of December on it's calendar located here. Below is a list of the sessions, dates and times and descriptions.

 

DL Windows v.5

This course will cover all aspects of DL Windows Software programming, including setting up a system with users, time zones, schedules, programming and retrieving an audit trail for the Trilogy T3 products. This class is a must for anyone that uses the Trilogy Standalone access control locks both the T3 standalone and Networx products. Several tips and shortcuts will be shown to the student for easier software usage.

4 sessions available:

Tuesday December 1 11am and 3pm Eastern time and Tuesday December 15 11am and 3pm Eastern time

 

Alarm Lock Basic Networx Connectivity

This course will cover the Alarm Lock Networx product line. The student will be shown how to discover the Networx gateways and locks in the DL Windows software. The locks will then be programmed via the gateway. The Emergency Global Commands will be demonstrated as well as some of the unique features that the Networx locks are capable of preforming.

 

4 sessions available:

 

Thursday December 3 11am and 3pm Eastern time and Thursday December 17 11am and 3pm Eastern time

 

Sign up for these very popular and informative training webinars.

Alarm Lock October webinars

Don't forget to register for the webinar trainings coming up Oct 20, 21, 28 and 29. There are different topics each day at 11 am and 3 pm Eastern time.

Oct 20

T2 Product line programming and installation - This session is designed for the locksmith, dealer or installer. The entire T2 product line will be discussed and will include how to program the lock at the keypad and how to install each type of lock. The line includes models for cylindrical, mortise, exit bar, narrow stile and double sided keypad applications.

Oct 21

DL Windows v.5 - This session will cover the Alarm Lock Trilogy programming software (DL Windows) for programming the T3 and Networx line of locks. Topics covered will include how to properly install the software, creating accounts and lock profiles, adding users including Master Code and managers, scheduling and how to use the programming devices (AL-PCI2-U cable and DTM III).

Oct 28

Basic Networx - This session will cover the Networx locks including the ArchiTech line. Topics covered will include how to discover the Gateway and Expander, discover the locks, how to send programming to the locks and the Emergency "Global" commands.

Oct 29

Advanced Networx - This session will cover more advanced topics of the Networx products. Topics covered will include how to set up the Network Configuration for the Gateways, the Gateway Config window and the Lock Profile right click options. How to set up the system for remote programming will also be discussed.

 

Click here to find a topic and time that fits into your schedule.

Alarm Lock webinar training

Alarm Lock has the updated schedule of webinars for October listed on the Seminars page of the Alarm Lock website. You can see the entire schedule by clicking here. Topics include:

Alarm Lock Trilogy T2 product line Installation and Programming

    There are 4 sessions of this new webinar training. These sessions will cover the entire Trilogy T2 product line and will include the proper installation and keypad programming of this popular format of lock. The T2 series is all keypad programmed and you will be shown some of the basic functions but also some of the less commonly known functions. The product line now includes, cylindrical, mortise, exit bar trim, double sided (keypad on both sides) and the narrow stile. There will be 4 sessions during the month.

DL Windows version 5

    This popular webinar will show you how to properly download and install the software. You will be shown how to create an account, add lock profiles and Global Users. You will also learn how to create schedules including the Open Window schedules. We will discuss some of the lesser known features of the locks such as Group 2 toggles passage mode and how to set up a wireless remote release. The DTM III and PCI programming devices for the T3 line will also be demonstrated.

Basic Networx Connectivity

    This session will show you the Networx product line and how to discover the Gateways, Expanders and Locks. The Global Emergency commands will be demonstrated as well.

Advanced Networx Connectivity

    The Advanced session on Networx Connectivity will walk you through the more advanced features of the Networx system. We will discuss how to configure the Gateways network configuration (static IP address and WiFi settings), how to set up for remote (off site) connection to the gateways and how to replace a Gateway. Other items such as the right click menu for the locks which includes features such as passage mode and manual unlock.

Don't miss out on these valuable training sessions. You can sign up for these webinars by clicking here.

 

Andy Phelps CRL, CAI

National Training Manager

New web training courses listed on Alarm Lock calendar

We are offering new web training courses that have never been offered in the past in the month of September. All of these sessions will be held twice on the day listed at 11 am and 3 pm Eastern time. Below is a list of the upcoming sessions and descriptions:

Tuesday Sept 8 - Trilogy Installation and Repair  

This session will cover the proper installation of the Trilogy cylindrical, exit bar trim and Narrow style locks. The proper tools necessary and some tricks to make the installation easier are covered. The repair of the mortise and exit bar trim will be shown along with parts that are available for the repair. The cylindrical lever return spring replacement will also be shown.

Wednesday Sept 9 - Alarm Lock Pilfergard exit alarms

This session will cover the Alarm Lock Pilfergard exit alarms that are used to monitor doors for unauthorized exit. These small devices mount on the door or frame and have either a keyed cylinder or keypad to disarm for authorized exit. These are popular on stairwell doors or unmanned rear doors in areas such as stock rooms. Proper installation and first time set up are described along with other options for things such as monitoring multiple doors and even a doorbell function.

Wednesday Sept 16 - Alarm Lock Alarmed exit bars

These alarmed exit bars are used to monitor unmanned exits to prevent unauthorized exit just like the Pilfergard but are a also the locking device. The proper installation and set up will be covered.

Thursday Sept 17 - Trilogy T2 and T3 keypad programming

These sessions will cover the most used keypad programming functions of the T2 and T3 stand alone access control locks. Functions such as changing the master code, add/delete/changing of user pin codes and passage mode will be shown on a mounted lock. Other not so widely known functions such as finding the user position of a pin code on a T2 and adding schedules on a T3 will be covered.

Also, there will be an additional day covering the DL Windows v5.5.3 Trilogy lock programming software on Tuesday Sept 15.

There will be a limited number of registrations for each of these sessions so hurry and grab your spot to get more information on the Alarm Lock product line and software.

Click here to go to the registration page and sign up for the session(s) and time slot that works in your schedule.

Live Alarm Lock webinars next week Aug 26-27

These valuable sessions are for those that have the Alarm Lock DL Windows sofware and Networx locks. There are 2 different topics covered this week. Wednesday, August 26, will be DL Windows offered at 11 am EDT and 3 pm EDT. This session covers the basics of DL Windows software version 5.5.3. 

Session 2 will be Thursday, August 27, offered at 11 am EDT and 3 pm EDT and will cover the basic set up of a Networx lock system. This will cover how to discover a gateway and lock. The Global Emergency commands will be shown.

Click here to find a session that works within your schedule. I know that you are busy during the day, so we offer recorded sessions as well that you can watch at any time.

Alarm Lock YouTube channel

Did you know that Alarm Lock has a YouTube channel? We do.

This channel is dedicated to Alarm Lock Trilogy locks and the DL Windows programming software. There are approx 40 videos that most are about 4-5 minutes long and show you how to use the Trilogy lock keypad or use the DL Windows programming software.

Topics covered range from how to change the master code on a DL2700 T2 lock to how to program a Networx lock via the DL Windows software.

There are videos showing how to install the latest version of DL Windows that includes where to find the software on the web and how to properly install it. Also there is a video on how to upgrade your software database from version 4.1.96 to 5.5.3 and how to upgrade the database from any version 5 older than 5.5.2 to the latest version of DL Windows 5.5.3.

So check out our YouTube channel if you get stuck on how to add a user pin code at a DL3000 (T3) lock or want to know how to create an unlock schedule in the DL Windows software to have a T3 lock automatically unlock at a specific time of the day and lock back.

Click here to get to the Alarm Lock YouTube channel.

Popular DL Windows and Networx webinars April 21-23

Due to the popularity of these informative live webinars, we have scheduled another set of sessions for April 21-23. There will be 2 sessions per day, 11 am and 3 pm Eastern Time. On Tuesday, April 21, DL Windows session 1 will cover how to create new accounts and lock profiles as well as how to add users into the database and assign them to locks. Andy Phelps, Alarm Lock National Training Manager will discuss how to enable and disable the users in the locks as well. He will show how to program the legacy Trilogy locks using the AL-PCI2U cable and the DTM III (Data Transfer Module).

Wednesday April 22, DL Windows session 2 will cover how to create schedules such as Passage mode, Group enable and disable and Holiday schedules. He will also discuss different features that the different lock models have such as Group 2 toggles passage mode and remote release.

Thursday April 23, the Networx session will cover how to discover the gateways and locks and how to program the locks via the gateway. He will also discuss some of the new features available in the latest version of DL Windows 5.5.3 for the Networx locks such as manually unlock door and Holiday Passage Mode override schedules.

Don't miss out on these valuable FREE training sessions on DL Windows and Networx locks. Click on this link to register for one or all of these sessions.

DL Windows and Networx webinars set for November 25-27

There are new live webinar sessions scheduled for November 25-27. There will be 2 sessions per day, 10 am and 1 pm Eastern Time. On Monday, Nov 25, DL Windows session 1 will cover how to create new accounts and lock profiles as well as how to add users into the database and assign them to locks. Andy Phelps, Alarm Lock National Training Manager will discuss how to enable and disable the users in the locks as well. He will show how to program the legacy Trilogy locks using the AL-PCI2U cable and the DTM III (Data Transfer Module).

Tuesday, Nov 26, DL Windows session 2 will cover how to create schedules such as Passage mode, Group enable and disable and Holiday schedules. He will also discuss different features that the different lock models have such as Group 2 toggles passage mode and remote release.

Wednesday, Nov 27, the Networx session will cover how to discover the gateways and locks and how to program the locks via the gateway. He will also discuss some of the new features available in the latest version of DL Windows 5.5.3 for the Networx locks such as manually unlock door and Holiday Passage Mode override schedules.

Don't miss out on these valuable FREE training sessions on DL Windows and Networx locks. Click on this link to register for one or all of these sessions.